Texas Instruments DU9000 Benutzerhandbuch
®
6
Safety Notice
Introduction
The User's Manual describes the installation, setup and operation of the DU9000 projector and provides as-
sistance to the installers and end users to fully ensure the performance of the projector.
Vivitek has made every effort to ensure that the information in this Manual is correct at the time of printing.
The contents may be updated due to product enhancements, customer feedback or improvements. You can
find the latest version of the Manual and the manual of other Vivitek products at www.vivitekcorp.com.
Product Features
The Vivitek DU9000 features advanced technology and industry leading optical design to provide a crisp,
high resolution bright, crisp and vivid image.
Main Characteristics and Advantages of the Product Series:
• The DLP system with the high performance digital micro mirror device (DMD) in conjunction with advanced
thermal management technology provides the excellent projecting performance and reliability.
• The advanced dual-lamp optical engine as well as single-lamp, dual-lamp, normal, energy-saving and
Custom Lamp Power mode offer flexible installation together with energy and cost savings. The lamp
power can be adjusted in the normal and energy-saving modes to make it easier for the installation per-
sonnel to fine-tune the edge blending brightness of multiple projectors.
• With the lamp switching feature, the projector can automatically select the lamps less used when turned
on.
• The projector has the replaceable color wheel and smart color wheel switch design. It can automatically
detect and switch the parameter of corresponding color wheels and can be used in conjunction with the
color wheel of high brightness or beautiful hues. It is applicable to the single projector.
• The interchangeable lens design allows users change the suitable lens by pressing the Lens Release key
easily and quickly.
• With the complete series of motorized projection lenses, the horizontal shift, focusing and zooming of lens-
es can be electrically controlled. The throw ratio ranges from 0.84:1 to 4.0:1 is suitable to be used in most
applications.
• The mechanical shutter is built in the optical engine and allows the user to Blank/Freeze projection by
pressing a single key.
• The high performance video processor can be used in progressive and interlaced scanning of the video
inputs and video diagnosing.
• The complete input terminal support many input signals, such as HDMI, 3G/HD/SD SDI, HDBaseT, Com-
ponent and VGA, etc.
• With the built-in HDBaseT signal reception, HDBaseT transmitter can send high quality video and control
signals through the single RJ45 cable.
• Many 3D display formats is supported, such as Top/Bottom, Side by Side and Frame Packing.
• The synchronization of DLP Link and 3D IR is supported with 3D Sync connector.
• With the high efficient power switch, the power consumption is less than 5W on stand-by mode.