Epson EMP-S3 Benutzerhandbuch
70
List of ESC/VP21 Commands
USB Connection Setup
In order to control the projector using ESC/VP21 commands via a USB
connection, the following preparations must be carried out.
connection, the following preparations must be carried out.
PROCEDURE
A
Download the USB driver (USB-COM Driver) from the
EPSON website to your computer.
The URL is as follows.
EPSON website to your computer.
The URL is as follows.
B
Install the downloaded USB driver onto your
computer.
Read the instructions displayed on the download screen.
computer.
Read the instructions displayed on the download screen.
C
Change the "Link21L" setting in the "Extended" menu
to "ON".
to "ON".
D
Turn the projector's power off.
E
Turn off this projector after the confirmation buzzer
beeps twice.
Once the projector's power has turned back on, communication
via a USB Connection will then be possible.
beeps twice.
Once the projector's power has turned back on, communication
via a USB Connection will then be possible.
If you disconnect the power cable before the
confirmation buzzer beeps twice, the communication
port is not changed.
confirmation buzzer beeps twice, the communication
port is not changed.