Epson EMP-TW680 Benutzerhandbuch
8
Part Names and Functions
Rear
Base
•
[SCART] input port
Connects to the SCART ports of
other video equipment using the
D4 SCART adaptor that is
packed with the projector.
other video equipment using the
D4 SCART adaptor that is
packed with the projector.
•
[Trigger out] port
When the projector power
is turned on, a 12 V DC
signal is output from this port.
When the projector's power is
turned off or a problem with
operation occurs, the output
becomes 0 V to send the
projector's power ON/OFF
status to an external device.
is turned on, a 12 V DC
signal is output from this port.
When the projector's power is
turned off or a problem with
operation occurs, the output
becomes 0 V to send the
projector's power ON/OFF
status to an external device.
•
[Video] input port
Connects to general video ports of
other video equipment.
other video equipment.
•
[HDMI ] input port
Connects to video equipment or a
computer that is HDMI-
compatible.
computer that is HDMI-
compatible.
•
[S-Video] input port
Inputs an S-Video signal to the
projector from other video equipment.
projector from other video equipment.
•
[RS-232C] port
Connects the projector to a computer
using an RS-232C cable. This port is
for control use and should not be used
by the customer.
using an RS-232C cable. This port is
for control use and should not be used
by the customer.
•
Power inlet
Connects the power cable.
•
Main power switch
•
Security lock
•
Remote control
light-receiving
area
light-receiving
area
Receives signals
from the remote
control.
from the remote
control.
•
[InputB] port
Connects to the RGB
port of a computer.
port of a computer.
•
[InputA] port
Connects to the component video (YCbCr or YPbPr ) ports
of other video equipment.
of other video equipment.
•
Suspension bracket fixing points (4 points)
Install the optional ceiling mount here when suspending the projector from a ceiling.
•
Air filter (air intake vent)
Prevents dust and other foreign particles
from being drawn into the projector.
It should be cleaned periodically.
from being drawn into the projector.
It should be cleaned periodically.
•
Lamp cover
Open this cover when replacing the lamp
inside.
inside.