Epson 200 Benutzerhandbuch

If the image colors don’t look correct, you can adjust them using these settings. Use the first 
three settings described below to make the most visible changes. If you only need to make 
slight adjustments, you can fine-tune the picture with the last two settings.

Note: You can also make color adjustments by attaching a PC or laptop to the projector and using 
the Cinema Color Editor software. See page 39.

■

Color Intensity

Use this setting to adjust the color saturation of the image. (This setting is not available 
for computer images.)

■

Tint

Use this setting to shift the color balance between magenta and green. (This setting is not 
available for computer images.)

■

Color Temp.

Use this setting to shift the color balance between red and blue.

Note: You can also access the Color Temp. setting by pressing the 

button on the remote 

control to open an on-screen “line menu.” 

■

Flesh Tone

Use this setting to make fine adjustments to the tint. Controls the amount of magenta or 
green in the image. Also useful for correcting black-and-white images, if they look tinted.

Note: You can also access the Flesh Tone setting by pressing the 

button on the remote 

control to open an on-screen “line menu.” 

■

RGB

Use the RGB settings to fine-tune the color of the image. You can adjust the offset, 
gamma, and gain for each signal color (red, green, and blue). Use 

Offset

 to adjust darker 

shades, 

Gamma

 for intermediate shades, and 

Gain

 for the lightest shades. 

Image

! Picture Quality ! Color Intensity

Image

! Picture Quality ! Tint

Image

! Color Adjustment ! Color Temp. ! Color Temp.

Image

! Color Adjustment ! Color Temp. ! Flesh Tone

Image

! Color Adjustment ! RGB