Hitachi CP-S830W/E Benutzerhandbuch

Please basically use liquid crystal projector at the
horizontal position. 
If you use liquid crystal projector by the lens up
position, the lens down position and the side up
position, this may cause the heat inside to build up and
become the cause of damage.
Be especially careful not to install it with ventilation
holes blocked.

11

Determine picture size and projection distance as illustrated below.

a:Distance from the projector to the screen. 
(tolerance :     10%)

This screen size is full-screen size.(800 dots X 600 dots)

a

Screen

Adjust the projection position using the foot adjusters at the bottom of the projector.

· Do not unlock the foot adjusters while you do not support the projector, to avoid falling of

the projector and causing an injury.

· Do not revolve the foot adjusters by force, the foot adjusters is damaged.
· Securely lock the adjuster.
· Do not apply unnecessary force from the upper side when lifting the projector. Otherwise,

projector may be damaged or a finger could be caught and cause injury.

1.  Lift up the projector and press the button of the adjuster to release the lock.

2.  Adjust the projection angle, release the button of the adjuster and securely lock it.

3.  To adjust the angle slightly, revolve the foot adjusters.

Foot adjuster

Lens center

A viewing angle of 0û~9û can be changed.

Caution

Screen (inch)

a (inch)

Minimum

Maximum

40

67

87

60

98

130

80

130

173

100

165

217

120

197

260

150

248

327

200

331