Infocus IN1112a Benutzerhandbuch

If necessary, adjust the height of the projector by pressing the elevator foot release 
button to extend the foot.

If necessary, rotate the leveling foot located at the rear of the projector.

Avoid placing your hands near the hot exhaust vent at the side of the projector.

Position the projector the desired distance from the screen at a 90 degree angle to 
the screen.

See page 6 for a table listing screen sizes and distances.

Adjust the zoom or focus, as needed.

If the image is not square, first make sure that the projector is perpendicular to the 
screen. If the image is larger or smaller on the top or bottom edge of the screen, 
press the top Keystone button to reduce the upper part of the image, and press the 
bottom Keystone button to reduce the lower part.

If the left or right side of the screen is larger or smaller the other, you can turn the 
projector to the left or to the right a few degrees to square the image.

Adjust the Contrast or Brightness in the Basic menu. See page 25 for help with 
these menu adjustments.

For Aspect Ratio, keep in mind that DVD players must be configured for 16:9 in 
order to view the highest quality image. For more information regarding Aspect 
Ratio, see page 25.

adjust height

release button

elevator foot

adjust distance

adjust zoom or focus

zoom (rear ring)

focus (front ring)

adjust keystone

adjust Basic menu