Infocus IN1112a Benutzerhandbuch
45
Auto: Auto channel switching is not supported.
3
Save the configuration by highlighting the checkmark and press the Select key.
4
If you want to exit without saving either press the Menu key or highlight the X
and press the Select key. The AP mode icon will display in the upper right
corner of the projected image.
and press the Select key. The AP mode icon will display in the upper right
corner of the projected image.
Client Mode
To connect to an existing WiFi network:
1
Highlight Client mode and press the Select key.
2
Use the left arrow to highlight On and press the Select key. The Settings menu
for Client Mode will open.
for Client Mode will open.
3
Highlight the desired SSID and press the Select key.
4
If necessary, select the correct PSK type for your network, ASCII or HEX16.
5
If necessary, select the correct index for your network (1-4).
6
If necessary enter the PSK, highlight PSK and press the Select key.
7
Using the arrow keys and onscreen keyboard, highlight an alphanumeric
character or symbol, and press the Select key.
character or symbol, and press the Select key.
8
Repeat until the PSK is complete.
9
Press the Menu key to exit the keyboard.
10
To accept the changes highlight OK and press the Select key.