Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Infocus
  4. IN122
  5. Benutzerhandbuch

Infocus IN122 Benutzerhandbuch

Download
Seite von 36
11
Shutting down the projector
Auto Off Time
The projector also has an Auto Off Time feature that automatically turns the projector off 
after no active sources are detected and no user interaction with the projector is performed 
for 30 minutes. By default, this feature is off. You can change the length of time, see page 29.
Turning off the projector
To turn the projector off, press the 
Power
 button on the remote or keypad. The lamp turns 
off and the Power LED blinks blue for 1 minute while the fans continue to run to cool the 
lamp. If the Power Saving Mode feature is on and when the lamp has cooled, the LED lights 
blue and the fans stop. If the Power Saving Mode feature is off and when the lamp has cooled, 
the LED blinks blue and the fans stop. Unplug the power cable to completely power off the 
projector.
Troubleshooting your setup
If your image appears correctly on the screen, skip to the next section. If it does not, 
troubleshoot the setup.
The Status Indicator Panel on top of the projector indicates the state of the projector and 
can help you troubleshoot
TEMP/LAMP
POWER
.
Table 3: Status indicator light behavior and meaning
Status Indicator Light
Meaning
POWER: Solid blue
POWER: Blinking blue
1. If the Power Saving Mode feature is on, 
the projector is plugged in.
2. The projector is on and initialized.
3. The projector is in normal operation.
1. If the Power Saving Mode is off, the 
projector is plugged in.
2. The projector is powering down and 
the fans are cooling the projector.
POWER: Blinking blue
TEMP/LAMP: Blinking pink
POWER: Solid blue
TEMP/LAMP: Blinking pink
The projector fan(s) are not operating 
correctly and the projector has been shut 
down.
The lamp failed to ignite.
Contact Technical Support if the problem 
persists. Visit www.infocus.com/support 
to contact service.
POWER: Solid blue
TEMP/LAMP: Blinking red
The lamp has reached its end of life and 
must be replaced. The lamp will continue 
to operate until it fails.
Contact Technical Support. Repair may be 
needed.
POWER: Solid blue
TEMP/LAMP: Blinking blue
1. The projector is overheating and the 
lamp will be shut off. The fans will 
continue to run.
2. The projector will not turn back on 
until the cooling process is complete.