Infocus IN3128HD Benutzerhandbuch

•

: the default action. Shows the Source Info menu.

•

: shows the Projector Info menu.

•

: removes noise around the image.

•

AV Mute: enables or disables AV Mute function.

•

Closed Captions: enables or disables Closed Captions.

Keypad: enables or locks the projector keypad.

Lamp Low Power: toggles between on and off. Turn it on to lower the light 
output of the lamp. This also lowers the fan speed, making the projector qui-
eter.

Language: allows you to select a language for the onscreen display.

Menu Position: allows you to change the position of the On Screen Display 
items.

Menu Transparency: allows you to change how much of the projected image 
behind the menu you can see. As the value increases, more of the image behind 
the menu is visible.

Show Messages: displays status messages (such as “Searching”) in the lower-
left corner of the screen.

PIN Protect: The PIN (personal identification number) feature allows you to 
password protect your projector. Once you enable the PIN feature, you must 
enter the PIN before you can project an image. Use the Up/Down/Left/Right 
arrows buttons on the remote or keypad to set a 4-button press sequence. If you 
enter an incorrect PIN 3 times in succession, the projector will automatically 
shut down. If you lose or forget your custom PIN, contact InFocus Technical 
Support.

Power up the projector. The “Enter PIN” dialog box  displays after the startup 
screen. Enter the PIN. Use the Up/Down/Left/Right arrows buttons on the 

remote or keypad to enter the correct 4-button press sequence. The default 
code is Left/Right/Up/Down.

Select “Change PIN...” in the Advanced Menu > Setup > PIN settings menu. 
Enter the existing PIN. Enter the new PIN.

Power Saving Mode: When the Power Saving Mode is On and the projector is 
in standby (powered off but connected to AC power), the monitor out function 
will not work. When the Power Saving Mode is On and the projector is Off, 
the LAN control will not work. NOTE: The Power LED does not blink when 
Power Saving Mode is enabled.

Auto Source: When this feature is On, the projector automatically finds the 
active source, checking the selected Power-up Source first. When this feature 
is Off, the projector defaults to the source selected in Power-up Source. To dis-
play another source, you must manually select one by pressing the Source but-
ton on the remote or keypad and selecting one from the displayed Source 
menu.

Power-up Source: determines which source the projector checks first for 
active video during power-up.

Search Screen: allows you to display a solid color screen (blue, black or 
white), or the factory logo screen at startup, and when no source is detected.

Auto Off Time: automatically turns the projector off after no signals are 
detected for a preset number of minutes. If an active signal is received before 
the projector powers down, the image will be displayed.

High Altitude Setting: We recommend you turn on the High Altitude Mode 
when your environment is between 5000' (1500m) and 10,000' (3000m) above 
sea level.