Infocus IN3128HD Benutzerhandbuch

Connect one end of the provided computer cable to the Computer 1/Computer 2 

connector on the projector and the other to the VGA connector on your computer. If 

you are using a desktop computer, you will need to disconnect the monitor cable 

from the computer’s video port first.

HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI 

provides an interface between sources, such as set-top boxes, DVD players, and 

receivers and your projector. Plug an HDMI cable into the video-out connector on 

the video device and into either the HDMI 1 or HDMI 2 connector on the projector.

Using a USB-A to USB Mini B cable connect the source computer to the projector. 

In the Source Menu select the Mini-B input. The application will automatically run 

from the projector is AutoRun is enabled on the computer. If it is not, open the drive 

called “ifPresenter” and run autorun.exe. The program will automatically select the 

native resolution of the projector

Connect the black power cord to the Power connector on the rear of the projector 

and to your electrical outlet. If the Power Saving Mode feature is off, the Power 

LED on the Status Indicator Panel (page 11) blinks blue. If the Power Saving Mode 

feature is on, the Power LED is steady blue. By default, this feature is off. You can 

change the setting, see page 27. NOTE: Always use the power cord that shipped 

with the projector.

To get sound from the projector, connect an audio cable (optional cable, not 

included) to your computer and to the Audio 1 or Audio 2 connector on the 

projector. You may also need an adapter.

If you are using a desktop computer and want to see the image on your computer 

screen as well as on the projection screen, connect to the desktop’s computer cable 

to Computer 1 and the desktop’s monitor cable to the Monitor out connector on the 

projector. 

connect VGA cable

connect HDMI

connect power

connect audio cable