Infocus IN1503 Benutzerhandbuch

LitePort displays a slide show of JPEG images stored on a USB flash drive 
connected to the projector. This feature can eliminate the need for a computer 
source.

LitePort displays image files in JPEG format only (file extensions .JPEG and .JPG). 
Other file types including PDF, BMP, TIFF, PNG, GIF, etc. are ignored.

To view your pictures as a slide show, follow these steps:

Connect a USB flash drive to your computer and copy JPEG files from your 

computer to the USB flash drive.

Turn on your projector if needed. 

Remove the USB flash drive from your computer and plug it into the LitePort 

connector on the rear of the projector.

The projector will start a slide show of the images found (if you see image 

thumbnails instead, see To Start the Slide Show section below).

To go to the next image in the slide show, press the Down or Right arrow button 

on the projector keypad or remote. To go to the previous image, press the Up or 
Left arrow button.

When you plug a USB flash drive into the projector's LitePort connector, the 
projector will scan the drive and then either start a slide show or show image 
thumbnails.

To stop the slide show and view thumbnails: Press the Select button during the 
slide show. In Thumbnails view, the name of the current folder, the current image 
number, and the total number of images in that folder are shown at the bottom of the 
screen. While viewing thumbnails, press the arrow buttons to scroll through the 

thumbnails, or press Select when an image is highlighted to start the slide show, or 
press Select when a folder is highlighted to open that folder.

To start the slide show: While viewing thumbnails, press the arrow buttons to 
highlight a thumbnail, then press the Select button to start the slide show at the 
highlighted image.

To change the image during the slide show: Press the Down or Right button to go 
to the next image, or press the Up or Left arrow button to go to the previous image 
(the slide show may also advance automatically depending on the value of the Next 
Slide setting; see the LitePort Menu section below for details).

To change to a different folder: While viewing thumbnails, press the arrow 
buttons to highlight the desired folder icon, then press the Select button (to go to the 
higher-level folder, select the folder icon labeled "Up").

To change LitePort settings: Press the Menu button during the slide show, or 
while viewing thumbnails (see the LitePort Menu section below for details).

To show the LitePort menu, press the Menu button on the keypad or remote during 
the slide show, or while viewing thumbnails. To highlight a menu item, press the 
arrow buttons. Then to do the action or change the setting, press Select. To remove 
the menu, press the Menu button again.

Rotate Picture: Rotates the current image by 90 degrees clockwise (rotation is 
temporary; the image returns to its original orientation when the USB flash drive is 
removed from the projector or when the projector is turned off).

Stop/Start Slideshow: Stops the slide show, or starts it at the selected thumbnail 
(when the menu is not visible, you can also stop or start the slide show by pressing 
the Select button).

Go to Projector Main Menu: Removes the LitePort menu and displays the 
projector's main menu, where you can adjust the picture or change other projector 
settings.