Infocus IN5502 Benutzerhandbuch

Connecting power

Connect the black power cord to the Power connector on the rear of the

projector and to your electrical outlet. The Power light on the Status

Indicator Panel (page 15) turns amber.
NOTE

: Always use the power cord that shipped with the projector.

Connecting a computer source

DisplayLink

If you have a Windows or Macintosh computer, connect the USB cable

between your computer's USB port and the projector's DisplayLink

connector

*. Then to begin installation of the DisplayLink software:

Windows:

Follow the instructions on the screen.

Macintosh:

A folder will open containing a file named DisplayLink

Installer.pkg. Open that file and follow the instructions on the screen.
* For detailed DisplayLink instructions and troubleshooting, and to download the

latest DisplayLink software, go to www.infocus.com/support/displaylink.

VGA connection

Connect one end of the provided computer cable to the VGA 1 or VGA 2

connector on the projector and the other to the VGA connector on your

computer. If you are using a desktop computer, you will need to disconnect

the monitor cable from the computer’s video port first (you can connect this

monitor cable to the Monitor Out connector on the projector, see next page).

HDMI 1.3 connection

HDMI is a standard, uncompressed, all-digital audio/video interface.

HDMI provides an interface between sources, such as set-top boxes, DVD

players, and receivers and your projector. Plug an HDMI cable into the

video out connector on the video device and into either the HDMI 1 or HDMI

connector on the projector.

To take advantage of HDMI 1.3 Deep Color (30 bit) you must have a 1.3-

compatible source.

RGBHV connection

Connect one end of the BNC cable to the computer and the other end of the

cable into the BNC connectors on the projector.

Connect power cord

MOLEX

Connect USB cable

Connect computer cable