Infocus IN5502 Benutzerhandbuch

38

Using LitePort

LitePort displays a slide show of JPEG images stored on a USB flash drive 

connected to the projector. This can eliminate the need for a computer 

source.

Image File Types

LitePort displays image files in JPEG format only (file extensions .JPEG and 

.JPG). Other file types including PDF, BMP, TIFF, PNG, GIF, etc. are 

ignored.

Viewing a Slide Show

To view your pictures as a slide show, follow these steps:

1

Connect a USB flash drive to your computer and copy JPEG files from 
your computer to the USB flash drive.

2

Turn on your projector if needed. 

3

Remove the USB flash drive from your computer and plug it into the 
LitePort connector on the rear of the projector.

4

The projector will start a slide show of the images found (if you see 
image thumbnails instead, see To Start the Slide Show section below).

5

To go to the next image in the slide show, press the Down or Right 
arrow button on the projector keypad or remote. To go to the previous 

image, press the Up or Left arrow button.

Controlling LitePort

When you plug a USB flash drive into the projector's LitePort connector, the 

projector will scan the drive and then either start a slide show or show 

image thumbnails.
To stop the slide show and view thumbnails: 

Press the Select button during the 

slide show. In Thumbnails view, the name of the current folder, the current 

image number, and the total number of images in that folder are shown at 

the bottom of the screen. While viewing thumbnails, press the arrow 

buttons to scroll through the thumbnails, or press Select when an image is 

highlighted to start the slide show, or press Select when a folder is 

highlighted to open that folder.
To start the slide show: 

While viewing thumbnails, press the arrow buttons 

to highlight a thumbnail, then press the Select button to start the slide show 

at the highlighted image.
To change the image during the slide show: 

Press the Down or Right button to 

go to the next image, or press the Up or Left arrow button to go to the 

previous image (the slide show may also advance automatically depending 

on the value of the Next Slide setting; see the LitePort Menu section below 

for details).
To change to a different folder:

 While viewing thumbnails, press the arrow 

buttons to highlight the desired folder icon, then press the Select button (to 

go to the higher-level folder, select the folder icon labeled "Up").
To change LitePort settings:

 Press the Menu button during the slide show, or 

while viewing thumbnails (see the LitePort Menu section below for details).

Using the LitePort Menu

To show the LitePort menu, press the Menu button on the keypad or remote 

during the slide show, or while viewing thumbnails. To highlight a menu 

item, press arrow buttons. Then to do the action or change the setting, press 

Select. To remove the menu, press the Menu button again.
Rotate Picture:

 Rotates the current image by 90 degrees clockwise (rotation is 

temporary; the image returns to its original orientation when the USB flash 

drive is removed from the projector or when the projector is turned off).
Stop/Start Slideshow:

 Stops the slide show, or starts it at the selected 

thumbnail (when the menu is not visible, you can also stop or start the slide 

show by pressing the Select button).
Go to Projector Main Menu: 

Removes the LitePort menu and displays the 

projector's main menu, where you can adjust the picture or change other 

projector settings.