Infocus IN5135 Benutzerhandbuch

8

2.3 Installing the second projector (Set B) 

To use Intelligent Stack, connect an RS-232 null modem cable between the 

CONTROL port of Set A and Set B.

 • KEYSTONE cannot be selected when PERFECT FIT is in use. To 

reset both functions, reset PERFECT FIT first.
• Set up the INSTALLATION settings first because the image position may 

change. (

 → 

) 

  Reset the adjustment of KEYSTONE and PERFECT FIT on Set 

B. 

(

 → 

 or 

)

  Turn on Set 

B.

 • After turning on Set 

B, verify the image of Set B is not significantly 

tilted compared to the image of Set 

A. If the image is overly tilted, rotate the 

elevator feet of Set 

B to adjust the angle so that the tilt is just about right. 

 • Set the tilt angle of Set 

B within 9 degrees of the level line.

Decide the position of Set 

B and its projection angle. (

 

→ 

 and 

)

WARNING ►For IN5142, IN5144, IN5144a and IN5145 only: You can install 

the projector in any direction with specified mounting accessories. Consult with 

your dealer for that type of installation.