Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Infocus
  4. IN5532
  5. Benutzerhandbuch

Infocus IN5532 Benutzerhandbuch

Download
Seite von 66
30
Setup menu
Language
: Allows you to select a language for the onscreen display.
Network: 
Allows you to setup network settings. See page 34 for details on 
network configuration and operation.
•
DHCP: 
Turns the DHCP on or off.
•
IP Address: 
Assign Network IP Address. 
•
Subnet Mask: 
Assign Network Subnet Mask.
•
Default Gateway: 
Assign Network Default Gateway.
•
WINS Host Name Lookup:
 Turns WINS Host Name Lookup on or off.
•
Host Name: 
Displays the host name.
•
MAC Address: 
Displays network MAC Address value.
•
Show Network Messages:
 Turns network messages on or off. Network 
messages display the projector’s IP address (and host name if enabled) 
when the projector is also displaying source messages.
•
Restart Network…:
 Restarts the network.
•
Network Factory Reset…: 
Performs factory reset.
Key Click
: Turns the key click sound on or off. When this setting is on, 
pressing keys on the keypad causes the projector’s speaker to play a “click” 
sound.
Custom Key
: Allows you to assign a different function to the Custom button, 
allowing you to quickly and easily use the effect. Highlight an effect and 
press Select to choose a different one.
•
Blank Screen
: Displays an empty screen.
•
Mute
: Turns off all sound.
•
Aspect Ratio
: Sets the ratio of image width to image height (see page 14 
and page 28).
•
Source
: Cycles through available sources.
•
Auto Image
: Resynchronizes the projector to the source (page 25).
•
Freeze Screen
: Pauses the projected image.
•
Source Info
: The default action. Shows the Source Info menu.
•
Projector Info
: Shows the Projector Info menu.
•
Overscan
: Removes noise around the image.
•
AV Mute:
 Enables or disables AV Mute function.
•
Closed Captions: 
Enables or disables Closed Captions.
•
SplitScreen:
 Enables or disables SplitScreen. Before using this for the 
first time, configure SplitScreen sources and layouts using the 
Blank Key
: Select what to display when the blank key on the remote is 
pressed: your custom snapshot, a solid color screen (blue, black or white), 
the factory logo screen, a timer, or test patterns. The timer option is useful 
for classroom tests or break times during meetings.
Source Keys: 
Enables or disables Source Keys on the optional
Commander-2 remote.
AC Power On
: When this feature is on, the projector automatically turns on 
when electrical power is connected. This allows control of ceiling mounted 
projectors with a wall power switch.
Auto Off Time
: Automatically turns the projector off after no signals are 
detected for a preset number of minutes. If an active signal is received 
before the projector powers down, the image will be displayed.
Screen Save Time
: Automatically blanks the screen with a black color after no 
signals are detected for a preset number of minutes. The image returns 
when an active source is detected or a remote or keypad button is pressed.
Sleep Timer: 
Allows the projector to automatically power off after it has been 
on for a specified amount of time.
Always-On Functions: 
Allows you to control which projector functions will 
work even when the projector is in standby (powered off but connected to 
AC Power). Press Up or Down to highlight the function you want to 
change, then press select or left and right to change the function to either 
Yes or No. Press menu when done.  Note that some functions must always 
have the same value; in this case when you change one value, other values 
in the submenu may also change automatically.