Infocus IN2126a Benutzerhandbuch

34

About Crestron e-Control®

1

The Crestron e-Control

®

 page provides a variety of virtual keys to control the 

projector or adjust the projector’s image. 

i.

These buttons function the same as the OSD menus and remote control 
functions. 

•

Source List: To switch the source, click on the desired source. 

•

Menu: Use to go back to the previous OSD menu, exit and save menu 
settings. 

•

When you use the projector control panel or remote control to change the 
OSD menu settings, it may take a while for the web browser to synchronize 
these changes with the projector.

2

The Tools page allows you to manage the projector, configure the LAN 
control settings and remotely access the network operations of this projector.

i.

This area is only used with a Crestron Control System. Please contact Cre-
ston or refer to the Crestron user manual for setup information.

ii.

This area is used for naming the projector, associating it with a particular 
location, assigning a responsible party to it, and adjusting network settings.

iii.

This area is used to set User and Admin passwords. When password protec-
tion is enabled, unauthorized changes to the projector configuration will be 
avoided.

• To prevent errors, only enter alphanumeric characters on the Tools page.
• After configuring the settings, press the Send button and the data will be 

saved in the projector.

• Press exit to go back to the Crestron remote network operation page.

You can press </> 

to reveal more 

buttons.