Acer 65PE Benutzerhandbuch

 

If replacing the lamp after 1500 hours of operation, please carry 
out the following operation within 10 minutes of powering on. 

 

Press the Exit button on the 
projector for 3 seconds or the 
Exit button on the remote 
control for 3 seconds and 
display the total lamp usage 
time. 

 

 

 

Press the Menu button on the 
projector or the remote control 
while the lamp usage time is 
being displayed, and the lamp 
hour display will be active and 
adjustable. 

 

 

 

 

Select the "Reset" item on 

the screen using the 

34 

buttons or on control pad or 
remote. 

 

Lamp Hours Used/Reset 

 

 

 

Press the “Menu” key and the main OSD 
menu structure will appear as shown at 
right (Fig. 23). Whenever AV box is 
attached, 4 subpages appear in the 
menu: Display page, Image page, Control 
page, and Source page. However if input 
is from PC and no AV box is attached, 
Source will disappear in the menu. 

Press the “Menu” key again to enter 

Display page items, or press “

3” or 

“

4” to select sub-pages. (The main OSD 

menu will automatically disappear if a 
key is not pressed within 10 seconds).  

Press the “Exit” button to leave the current sub-page, and press the 
button again to leave the main OSD menu 
(at the same time the settings are 
saved).