Canon WX6000 Benutzerhandbuch

24

Pay attention to the following points when installing or using the projector.
• Be sure to install the projector in a location where the air intake and exhaust vents 

are separated from the wall by more than 50 cm (1.6'). Failure to do so could cause 
a malfunction.

• Do not install the projector in a location that is damp, or where there is a lot of dust, 

oily smoke or tobacco smoke. Doing so could cause contamination of optical com-
ponents such as the lens and the mirror and may result in deterioration of image 
quality.

• Do not touch the lens with bare hands. Doing so may result in deterioration of image 

quality.

• If the projector is suddenly moved from a location where the temperature is low to a 

location where the temperature is high, or if the temperature in the location where the 
projector is installed increases suddenly, moisture in the air could cause condensa-
tion to form on the projector lens or mirror. This may cause a blurred image. Wait until 
the condensation has evaporated for the image projected to return to normal.

• Do not install the projector in a location where the temperature is high or low. Doing 

so may cause a malfunction.

Operating temperature: 5°C to 35°C Humidity level: up to 85%
Storage temperature: -10°C to 60°C

• Do not install the projector near high-voltage electrical power lines or an electrical 

power source.

• Do not use the projector on a soft surface such as carpet or sponge mat, etc. Doing 

so could cause heat to build up inside the projector and this could result in a mal-
function.

• Do not block the air intake or exhaust vents of the cooling fan. Doing so could cause 

heat to build up inside the projector and may cause a malfunction.

• Installing the projector in the wrong direction may cause a malfunction or accident. 

Install the projector so that the left / right incline is within 10°.

• Do not place any objects on top of the projector that may change shape or color due 

to heat.

• When using the projector at altitudes greater than 2,300 m, or for projecting 

upward / downward:

When using the projector at altitudes greater than 2,300 m, or for upward pro-
jection or downward projection, it is necessary to change the settings of the 
projector. For further details, contact the Canon Customer Support Center.