Crestron electronic CP-X2514WN Benutzerhandbuch

20

3. Web Control

Configures the wireless LAN settings.

Select “AD-HOC” or “Infrastructure”.

Configures network settings.

Enables DHCP.

Disables DHCP.

Configures the IP address when DHCP is disabled.

Configures the subnet mask when DHCP is disabled.

Configures the default gateway when DHCP is disabled.

Configures the DNS server address.

Select from “1” to “11” a channel to use in the AD-HOC mode.

Select data encryption method.

Input the WEP key.   
Either ASCII characters or hexadecimal numbers can be 
used during WEP key input. The length of the key is defined 
as follows according to the WEP and character formats.

Encryption

ASCII characters

HEX numbers

WEP 64bit

5 characters

10 characters

WEP 128bit

13 characters

26 characters

Input WPA Passphrase.  
Available number of input characters is 8 to 63. Only 
alphabets, numbers and following symbols can be used. 
 !"#$%&'()*+,-./:;<=>?@ [\]^_`{|}~ and space

Select an SSID from the list.  
If you require to set your unique SSID, select [Custom], then 
set your own SSID following the rules below. 
Maximum number of input characters is 32. 
Only alphabets, numbers and following symbols can be used.
 !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.

(continued on next page)

• Depending on the country where you are 

the channels may vary. In addition, depending on the 
country or region where you are may be required to use a 
wireless network card that confirm to the standards in the 
respective country or region.

NOTE