Crestron electronic CP-X2514WN Benutzerhandbuch

9

1. Connection to the network

■ Setting manually
The Network address portion of the IP address setting on your computer must 
be the same as the setting on the projector. Also, the entire IP address on the 
computer must not overlap with that of the other devices on the same network, 
including the projector.

The projector’s settings are as follows.

IP address: 192.168.1.254
Subnet mask: 255.255.255.0
(Network address: 192.168.1 in this case)

Therefore, specify the computer’s IP address as follows.

IP address: 192.168.1.xxx (xxx shows decimal number.)
Subnet mask: 255.255.255.0
(Network address: 192.168.1 in this case)

For example 

Select from 1 to 254 for “xxx” not duplicating with any other equipments. 
In this case, since the IP address of the projector is “192.168.1.254”, specify a 
setting between 1 to 253 for the computer.

• “0.0.0.0” cannot be set to the IP address.

• The projector’s IP address can be changed by using the configuration utility 
via a web browser. (

21)

• If the projector and the computer exist in the same network (i.e. same network 
address), you can leave the default gateway field blank.
• When the projector and the computer exist in different networks, the default 
gateway must be set. Consult to the network administrator in detail.

NOTE

■ Setting automatically
When a DHCP server exists in the connected network, it is possible to assign an 
IP address to the projector and computer automatically.
*  DHCP is abbreviation for “Dynamic Host Configuration Protocol” and has the 

function to provide necessary setting for network like IP address from server to 
client. A server that has DHCP function is called DHCP server.

(continued on next page)