Crestron electronic CP-X8150 Benutzerhandbuch

42

The Main window as shown above is 

displayed at first. However, if you have 

enabled User Password on the Tools window 

(&46), a dialog prompting you to enter 

the password as shown on the right will be 

displayed, and no operation is enabled until 

you have entered the password. After entering 

the preset password, the dialog disappears 

and the Main window will be displayed.

As shown below, you can open a window by 

clicking the corresponding tab at the top right 

of the window.

• If 

Crestron e-Control in the Network Settings (&21) is set to 

Disable, Crestron e-Control

®

 cannot be used to operate the projector. Enable 

Crestron e-Control and close the web browser. Next, restart the web browser, 

followed by entering the projector's IP address. 

• Only English is supported on Crestron e-Control

®

.

• If the connection is terminated, the "Loading..." screen will appear. Check the 

connection between the  projector and the computer, then return or refresh the 

Web page.

User Password dialog

Tab

Logs out from e-Control

®

. 

This tab appears only when User Password of the Tools window is 

enabled.

Opens Tools window (&45).

Opens Info window (&47).

Opens Help Desk window (&48).