Crestron electronic CP-X8150 Benutzerhandbuch

55

• With using the HALF-DUPLEX method, the projector can send out 

254 byte data as maximum at once.

• If it is not required to monitor the response data from an external device and 

the RESPONSE LIMIT TIME is set to OFF, the projector can receive the data 

from the computer and send it out to an external device continuously.

The OFF is selected as the default setting.

• In case that the computer controls to synchronize transmitting 

and receiving the data, it may not be able to control an external device well 

depending on the processing status of the projector.

6.4.2 FULL-DUPLEX
This method lets the projector make two way communication, transmitting and 

receiving data at the same time, without monitoring response data from an 

external device.

With using this method, the computer and an external device will send the data 

out of synchronization. If it is required to synchronize them, set the computer to 

make the synchronization.