Acu-Rite 954 Benutzerhandbuch

Remove the cover from the top 

of the scale by lifting it from 

one side. Cover may be used 

to weigh items on the scale 

(optional).

1. Place the scale on a flat, stable surface.
2. Press the "ON/OFF" button to power the scale ON.
3. Wait for the display to show "0.00".
4. Press the "UNIT" button to select your preferred measurement units. 

Measurement units include: GRAMS, OUNCES, PENNYWEIGHT, TROY 

OUNCES, and PIECE COUNT.

5. Place item(s) to be weighed on the center of the scale.
6. Weight will be shown on the display. Press the "UNIT" Button to convert 

the measurement units between grams (g), ounces (OZ), dwt (d), oz t (t) 

and piece counting mode (See below).

When Piece Counting Mode is selected, "PCS" will show on the display. To use 

Piece Counting Mode you must first calibrate the scale to an item. Next, you 

can place any amount of that same item on the scale and the scale will display 

the quantity (pieces) of that item.

Calibrate the Scale to an Item
1. Place the scale on a flat, stable surface.
2. Press the "ON/OFF" button to power the scale ON.
3. Press the "UNIT" button to select Piece Counting Mode ("PCS" is shown 

on the display).

4. Press and HOLD the "UNIT" button for 3 seconds to select 25, 50 or 100 

pieces. When a quantity has been chosen, place that same number of 

items on the weighing platform.

5. The quantity selected will flash on the display. The display stops flashing 

when the scale has determined the weight of the items. 

6. Weight will be shown on the display.

Determine the Quantity (Pieces) of an Item
1. Press the "ON/OFF" button to power the scale ON (if applicable).
2. Place any quantity of the item the scale has been calibrated to in the 

steps above on the scale. 

Continued on page 6.