A&D AD-4212B-101/102/201/301 Benutzerhandbuch

 

77

  Do not disassemble the balance. Contact the local A&D dealer if the balance needs service or 

repair.  

  Use the original packing material for transportation. 

  Do not use organic solvents to clean the balance. Clean the balance with a lint free cloth that is 

moistened with warm water and a mild detergent. 

 
 

The balance is a precision instrument. When the operating environment or the operating method is 

inadequate, correct weighing can not be performed. Place a sample on the pan and remove it, and 

repeat this several times. If the balance seems to have a problem with repeatability or to perform 

improperly, check as described below. If improper performance persists after checking, contact the 

local A&D dealer for repair.   

 

  Check the balance performance using the self-check function. 

1   Press and hold the MODE key until RESPONSE is 

displayed, and then release the key. 

2  

The balance automatically starts to check its 
internal performance   

3   After self-check, the balance displays the results 

and returns to the weighing mode. 

  

e.g. 

“ 

OK 

 

” 

   The example above indicates that the result of the 

self check is good. 

Note 
If improper performance is found in the self check, 
the balance displays    CH  no. Contact the local 
A&D dealer for repair. 
 

  Check the balance repeatability using the calibration weight. Be sure to place the weight in the 

center of the weighing pan. Pay attention to the air flow and be sure to use the breeze break. 

 Check the balance repeatability, linearity and calibrated value using external weights with a 

known value.