A&D AD-4212A/B Benutzerhandbuch

6. WEIGHING

6-1 Basic Operation (Gram Mode)

1 Plug in the AC adapter.

2 Press the ON:OFF key to display the weighing mode. (The

decimal point position depends on the balance model.)

Notes

The auto display-ON function is available to display the

weighing mode without the key operation when the AC
adapter is plugged in. (Function table: ba5fnc p-on)

The function not to tare at start can be selected. (Function

table: ba5fnc p-tr)
For details on the function table settings, refer to "10.
FUNCTION TABLE".

The factory setting of the minimum weighing value for the

AD-4212B-101/102 is 0.1 mg. To display 0.01 mg, press the

SAMPLE key. Then, warm up the balance for the

appropriate duration.

3 Place a container on the weighing pan, if necessary.
Press the RE-ZERO key to cancel the weight (tare). The

balance displays 0.0000 g. (The decimal point position
depends on the balance model.)

4 Place a sample on the pan or in the container. Wait for the

stabilization indicator to be displayed and read the value.

5 Remove the sample and container from the pan.

Notes

To use another unit, refer to “5-2 Changing the Unit”.

Press the SAMPLE key to switch the minimum weighing

value.

The function to turn on or off the minimum weighing value

automatically when weighing is started can be selected.
(Function table: ba5fnc rng ) For details, refer to "10.
FUNCTION TABLE".

The weighing data can be stored in memory. For details,

refer to “14. DATA MEMORY”.

Weighing

pan

Sample

Remove the

sample

(Software

version

display)

(Display OFF)

(All segments

display)

(Weighing

mode)

Container