Pitney Bowes DM525 Benutzerhandbuch

Seite von 208
4 • Running Mail
4-8
SV62201 Rev. C
Tips on Feeding 
Mail
Presealed Envelopes:  If you are using presealed envelopes, make 
sure you press the Seal key on the IntelliLink® Control Center and 
select Sealer off or the envelopes will jam. 
Pieces of mail that are 5/8" thick:  If you are running pieces of mail 
that are each 5/8” thick, you must run them one piece at a time. Do not 
stack them on the feed deck and attempt to feed them automatically - 
they will jam. 
Puffy mail:  Be sure to compress all "puffy" mail before placing it on the 
feed deck. 
Portrait flats or light, easily damaged mail:  You may want to reduce 
the speed at which the pieces of mail travel through the machine. To do 
this, press the 
Mode
 key, then press the right arrow key (
speed
) to 
change between normal and reduced speed. 
Any mail with the flap on the opposite side:  For mail where the indi-
cia is located on the side opposite of the flap (the flap is on the bottom 
of the mail piece), make sure the mail is completely sealed before pro-
cessing the mail in the WOW® mode as shown below.
Postcards:  You may want to process postcards using the reduced 
speed mode. Remember to use the Key in Postage mode for post-
cards.
if this is where you want the 
indicia ...
make sure the mail is completely 
sealed when you feed it through the 
machine
Flap face-down
and sealed