Pitney Bowes DM525 Benutzerhandbuch

6. Place the mail on the scale.

•

If you have previously selected a class, the system displays the fol-
lowing prompt at the top of the screen:  Print tapes automatically    
On or Off.
-

If you select On, then when you remove each piece of mail, the 
system automatically prints a tape. 

-

If you select Off, you remove the first piece of mail and place it 
on the feed deck. The system automatically feeds the mail. 

•

If you have not previously selected a class, you are prompted to 
select one now. For more information, refer to “Selecting the Class, 
Carrier, Special Services or Options”  in this chapter. 

7. Begin removing mail from the scale. Please note the following:

•

Remove each piece of mail in a single continuous motion. 

•

If you mistakenly remove more than one piece of mail, put all of the 
pieces of mail back on the scale. If you only put one piece back on, 
the system does not print the correct postage. 

8. When you remove the last piece of mail from the scale, the system asks 

you if you want to print postage. This is in case the last piece you 
remove from the scale is the container for the mail. 

To perform manual weight entry:

1. Press the Mode key. 
2. Select Manual Weight Entry.
3. Type in the number of pounds and press Enter.
4. If the weight of your mail is less than 1 lb, press the right arrow key to 

go to the ounces field. 

5. Type in the number of ounces and press Enter. 

Press the Class key if required and select the class. For more informa-
tion, refer to “Selecting the Class, Carrier, Special Services or Options”  
in this chapter.

6. If this is a package, press the Tape key, otherwise go to step 7.
7. Place the piece of mail on the feed deck.
8. Press the Start key.

NOTE:  If the weight you enter is invalid for the class, you are prompted to 
select another class.