Pitney Bowes DM525 Benutzerhandbuch

Each carrier has its own set of classes and each class has its own set of 
special services. When you select a class or carrier, only those options 
available for that selection display in the main screen. 

1. Press the Class key. A list of available classes appears in the screen.
2. Select the class and press Enter. 
3. If a ZIP Code or Zone is required, you are prompted to enter it. Press 

Enter to accept it. For more information, refer to “Selecting ZIP Codes 
and Zones”  in this section. 

4. If a country is required, you are prompted to select it. Press Enter to 

accept. For more information, refer to Selecting a Country in this sec-
tion. 

5. If special services are available with the class you select, they are dis-

played. 

6. Even if you do not want any special services, press the Enter key to 

confirm the class. 

7. Press the Tape key to print a postage tape. To apply postage to a piece 

of mail, place it on the feed deck and press the Start key.

If your postal rate or special service requires a ZIP Code or Zone, you are 
prompted to enter it. The system prompts you for either the ZIP Code or 
Zone (for details, see Setting Up the Scale/Rates: ZIP/Zone prompt section 
in Chapter 5 of this guide). 

1. When you select a class, you may be prompted to enter the ZIP Code 

or Zone: 
•

To access the Intra-BMC Package Services Parcel Post rates, enter 
only the first 3 digits of the ZIP Code. 

•

To access the Inter-BMC Package Services Parcel Post rates, enter 
all 5 digits of the ZIP Code. 

2. Press Enter. 

 When selecting a class/carrier: 

•

If your system has been set up to retain the class on each piece of mail 
weighed then the class that appears in the main screen will be the one you 
selected last. 

•

If you turn off and then turn on the power to your system, or if your system 
has been set up to clear the class on each piece of mail weighed, it will clear 
the class.  In this case, you need to select a new class. 

•

If you place a piece of mail on the scale, or enter a weight manually, the sys-
tem automatically prompts you to select a new class if the new weight 
requires a different class.