Pitney Bowes DM525 Benutzerhandbuch

Use this option to set the minimum weight that a piece of mail must weigh 
in order to use the differential weighing mode to print postage on a tape or 
on a piece of mail. For more information on differential weighing, refer to 
“Selecting the Postage Mode and Running the Mail”  in Chapter 4 of this 
guide.

When your system is shipped, the trip weight is set to 0.5 ounces (10 
grams). It is best to set the trip weight as high as possible to match the low-
est weight that you will use. For example, a #10 envelope with a single 
insert typically weighs 0.4 ounces. In this case, you would set the trip 
weight to 0.4 ounces. This will improve the efficiency of your system, espe-
cially in the AutoTape mode.

1. Press the Menu key on the control center and select Set Up. Press the 

down arrow key and select Scale/Rates.

2. Select the Diff Weigh Trip Wt option and use the numeric keypad to 

enter the trip weight.

3. Press the Enter key to set the weight. 



Use this option to control how the carrier and class are displayed on the 
Main screen.

1. Press the Menu key on the control center and select Set Up. Press the 

down arrow key and select Scale/Rates.

2. Select  Carrier/Class Disp. 

•

Select Class Only if you only want the class to display on the Main 
screen.

•

Select Concatenate Carrier and Class if you want the carrier and 
class to display on the main screen. I

Use this option to set the system to clear the class for each piece of mail 
weighed or to keep the last class used. 

1. Press the Menu key on the control center and select Set Up. Press the 

down arrow key and select Scale/Rates.

2. Select Class if new Piece. 

•

To clear the class information select Clear; set class to none. 

•

To retain the class information select Retain; use previous class. 

3. The system returns to the Scale/Rates Set Up menu. 

f you select this option the carrier and class name will be 

concatenated, or broken out onto multiple lines.