Pitney Bowes DM525 Benutzerhandbuch

The normal preset timer option allows you to specify how much time you 
want to allow the system to remain idle before it returns to the Normal Pre-
set settings (refer to  Define Preset section in this chapter for more informa-
tion on Normal Presets). 

You can set this timeout for 0 - 1440 minutes, in 1 minute increments. The 
default timeout is 30 minutes.

1. Press the Menu key and select Set Up. 
2. Select Basic Settings and then Timeouts. 
3. Select Normal Preset Timer. 
4. To set the timer, enter the number of minutes (0-1440) using the 

numeric keyboard. 

5. If you want the system to stay at the last settings used, select Never 

reset to Normal Preset. 

6. Press the Enter key. 

Use this option to specify how much time to allow before the feeder stops 
after the last envelope is processed. 

You can set this timeout for 5 - 90 seconds, in 1 second increments. The 
default timeout is 5 seconds. 

This reduces the wear on your machine and acts as a safety measure if 
you leave the machine unattended. 

1. Press the Menu key and select Set Up. 
2. Select Basic Settings and then Timeouts. 
3. Select Feeding Timeout.
4. Enter the number of seconds (0 - 90) using the numeric keyboard, or 

press the screen key corresponding to Turn Rollers off Immediately, 
or Run Until Stop key is Pressed.

5. If you entered the number of seconds, press the Enter key.

This option allows you to specify how long the system will continue to feed 
mail placed on the feed deck without having to press the Start key.

You can set this timeout for 0 - 90 seconds, in 1 second increments. The 
default timeout is 20 seconds.

1. Press the Menu key and select Set Up. 
2. Select Basic Settings and then Timeouts. 
3. Select Waiting for Env.
4. Enter the number of seconds (0 - 90) using the numeric keyboard.
5. Press the Enter key.