Pitney Bowes DM525 Benutzerhandbuch

When creating a custom preset, the mailing system will prompt you to 
select a class of mail if you are using Key In Postage mode. Selecting a 
class will ensure your preset values are  updated automatically when post-
age rates change.

1. Enter the values for the mail job (for example, the weighing mode, the 

postage value, class and carrier etc.) that correspond to the values you 
want to be able to call up in the future by selecting a custom preset key. 
For example, you may want to define a set of conditions so that the 
envelopes are sealed only (no postage applied).

2. Press the Custom Presets key. 
3. Press the right arrow key. 
4. Select Store Current Setting to Preset. 
5. A list of presets, starting with “0 Normal” appears. Select one of the pre-

sets that has not been defined yet. These presets are named “Avail-
able”. To change an existing preset, refer to “Editing Custom Preset 
Values”  in this section.

If you selected the Key in Postage mode, the system prompts you to 
choose a class for the preset. Choosing a class ensures that your pre-
set values are automatically updated when the postage rates change.

•

To choose a class, press the Select Class screen key and follow 
the prompts to select weighing and class options. Once you make 
the selections, the system returns to the Main screen. Return to 
step 2 to set the custom preset. 

•

To continue without selecting a class, press the down arrow.

6. The system prompts you to “Enter New Preset Name”. Type in the 

name using the alphanumeric keys. 

7. Press the Enter key.  The "View Preset" screen appears and displays 

all of the values you defined in this session. 

8. To use these values in the future, simply press the Custom Presets 

Key and select the screen key corresponding to this preset name.

9. Press the Enter key to return to the main screen.

NOTE:  You can elect to save the custom preset without a selecting a class, but 
your preset values will not update automatically when postage rates change.

NOTE:  Proceed as if you were actually running a job. Select the mode and 
class and service etc.  By doing this, you are entering the values that you 
will use for the normal preset. Refer to Chapter 4, Running Mail in this guide 
for more information on selecting mode and class.