Summit E323 Benutzerhandbuch
DOC-0331
Page 3
www.summitlaser.com
Lexmark E-321/E323 Toner Cartridges
(Continued)
Figure 2
Figure 3
Figure 4
Figure 5
1) On the left side of the cartridge (Chip Side) remove the 3 screws. See Figure 2
2) Carefully remove the end cap. Note that a spring will come loose and the cartridge will basically fall apart at this
point. If you intend to re-use the drum, make sure you are very careful not to damage it. See Figure 3
point. If you intend to re-use the drum, make sure you are very careful not to damage it. See Figure 3
3) Remove the drum cover. Note the position of the springs. See Figure 4
4) Remove the toner supply chamber (the second spring will come loose). Make sure that all the gears stay in
place. The supply hopper spring will come off, be careful not to lose it. See Figure’s 5 & 6 (on next page)
place. The supply hopper spring will come off, be careful not to lose it. See Figure’s 5 & 6 (on next page)