Summit E323 Benutzerhandbuch
DOC-0331
Page 4
www.summitlaser.com
Lexmark E-321/E323 Toner Cartridges
(Continued)
Figure 6
Figure 7
Figure 8
Figure 9
5) Remove the two front screws only from the right end cap. The back screw holds the long brace in place and
does not need to be removed. See Figure 7
does not need to be removed. See Figure 7
6) Remove the drum coupling gear (Smaller version of the 4039/4049). Remove the drum, remove the waste cham-
ber. The waste chamber has to be the last to come out as there is a side piece from it that fits behind the drum.
See Figure’s 8 & 9
ber. The waste chamber has to be the last to come out as there is a side piece from it that fits behind the drum.
See Figure’s 8 & 9