Summit HL-630 OPC Benutzerhandbuch

Seite von 46
 
12
 
 
 
 
 
 
HP LaserJet 1300 
HP Part # Q2613A/X  
OEM Stated Yield: 2,500/4,000 
 
The HP-1300 uses the second generation black toner 
cartridge ARD’s.  These chips (ARD’s) only 
monitor toner  usage not page counts. Each chip also 
has its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be 
set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of 
the menu. Since these machines do not have a 
display, only the supplies status page  will show 
“Non HP Toner cartridge”. If the chip is removed, 
the toner low sensors will be disabled, and will not 
work again until a new HP cartridge is installed. 
Replacement chips are available 
 
 
 
 
 
 
 
 
HP LaserJet 1320/1160 
HP Part # Q5949A/X  
OEM Stated Yield: 2,500/6,000 
 
The HP-1320/1160 uses the second generation black 
toner cartridge ARD’s.  These chips (ARD’s) only 
monitor toner  usage not page counts. Each chip also 
has its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be 
set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of 
the menu. Since these machines do not have a 
display, only the supplies status page  will show 
“Non HP Toner cartridge”. If the chip is removed, 
the toner low sensors will be disabled, and will not 
work again until a new HP cartridge is installed.  
Replacement chips are available. 
 
 
 
 
 
 
 
HP LaserJet 2300 
HP Part # Q2610A  
OEM Stated Yield: 6,000 
 
The HP-2300 uses the second generation black toner 
cartridge ARD’s.  These chips (ARD’s) only 
monitor toner  usage not page counts. Each chip also 
has its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be 
set to YES on the cartridge chip. Even after the 
cartridge is refilled, the printer display will still 
show “Toner Low” for the supplies status section of 
the menu. Since these machines do not have a 
display, only the supplies status page  will show 
“Non HP Toner cartridge”. If the chip is removed, 
the toner low sensors will be disabled, and will not 
work again until a new HP cartridge is installed.  
Replacement chips are available. 
 
 
 
 
 
 
 
 
HP LaserJet 2400 
HP Part # Q6511A/X  
OEM Stated Yield: 6,000,12,000 
 
The HP-2400 uses the second generation black toner 
cartridge ARD’s.  These chips (ARD’s) only 
monitor toner  usage not page counts. Each chip also 
has its own serial number which in effect gives the 
cartridge a serial number. After the OEM toner has 
been used up, the “toner low reached” code will be