Summit HL-630 OPC Benutzerhandbuch

 

2

 

 
New drum cartridges come with a clear “Starter 
Sheet” installed inside the cartridge. When the 
cartridge is installed and the cover closed, the printer 
will eject the sheet and at the same time, reset the 
drum counter. This sheet is also present in the DR-
200 cartridges. Replacement sheets are now 
available. 
 

After replacing the drum unit, keep the front cover 
open and press “Clear”. The display will show 
“Replace Drum?  1.Yes  2.No”  Press “1” the display 
will show “Accepted”, close the front cover. The 
counter is reset! 
 
MFC9700 Only:  After replacing the drum unit, 
keep the front cover open and press “Right Arrow” 
key. The display will show “Replace Drum?  1.Yes  
2.No”  Press “1”. Close the front cover. The counter 
is reset! 
 
 

 

 
 
 
 
 

 
Open the front cover. Locate the black button under 
the LED lights on the left side. Press and hold in the 
button until all the lights are lit. Release the button. 
The counter is reset! 
 

After replacing the drum unit, keep the front cover 
open (make sure the power is on). Press and hold the 
"GO" button for four seconds, the display will then 
show "DRUM CLEAR". Close the front cover. The 
counter is reset! 
 

Laser Printers: make sure the machine is turned on 
and the Drum LED is blinking. Press and hold the 
GO button for 4 seconds until all the LEDs light up. 
Once all the LEDs are lit, release the GO button.  
The counter is Reset! 

Fax machines: After replacing the drum unit, keep 
the front cover open (make sure the power is on). 
Press OPTIONS on the display panel. When 
REPLACE DRUM? Appears on the display, press 
“1”, when ACCEPTED appears, close the front 
cover. The counter is reset!