Summit HL-630 OPC Benutzerhandbuch
20
Lexmark E321/323
Lexmark Cartridge Part 12A7400/12A7405 (Prebate),
12A7305 (Non Prebate))
OEM Stated Yield: 3,000 (7400), 6000 (7305)
The “Return” cartridges have an ARD on a small
board located inside the right end cap of the
cartridge. Like other cartridges in this series, the
board for these cartridges has two contact pads
where the machine makes direct contact. New
replacement chips are available now. On the Non-
Prebate cartridges the chip is also present, but the
killer part is not active. These cartridges can be re-
manufactured as much as you want, the chip will not
interfere. There are multiple other printer brands that
use this engine. Make sure your replacement chip is
universal or brand specific if using in these
machines.
board located inside the right end cap of the
cartridge. Like other cartridges in this series, the
board for these cartridges has two contact pads
where the machine makes direct contact. New
replacement chips are available now. On the Non-
Prebate cartridges the chip is also present, but the
killer part is not active. These cartridges can be re-
manufactured as much as you want, the chip will not
interfere. There are multiple other printer brands that
use this engine. Make sure your replacement chip is
universal or brand specific if using in these
machines.
Lexmark T420
Lexmark Cartridge Part # 12A7410/12A7415
OEM Stated Yield: 12A7410 5,000: 12A7415
10,000
The “Return” cartridges have an ARD installed on
the front left side of the cartridge, (as the cartridge
would be inserted into the machine). Other vendors
such as Toshiba and IBM, and Dell are also using
this engine. Contact your vendor for the correct
chips. On the Non-Prebate cartridges however, the
chip is also present, but the killer part is not active.
These cartridges can be re-manufactured as much as
you want, the chip will not interfere.
the front left side of the cartridge, (as the cartridge
would be inserted into the machine). Other vendors
such as Toshiba and IBM, and Dell are also using
this engine. Contact your vendor for the correct
chips. On the Non-Prebate cartridges however, the
chip is also present, but the killer part is not active.
These cartridges can be re-manufactured as much as
you want, the chip will not interfere.
Lexmark T430
Lexmark Cartridge Part # 12A8420/12A8425
Non-return # 12A7310/12A7315
OEM Stated Yield: 12A8420 6,000: 12A8425
12,000
The “Return” cartridges have an ARD installed on
the front left side of the cartridge, (as the cartridge
would be inserted into the machine). Other vendors
such as Toshiba and IBM, and Dell are also using
this engine. Make sure your replacement chip is
universal or brand specific if using in these
machines. On the Non-“Return” (return) cartridges
however, the chip is also present, but the killer part
is not active. These cartridges can be re-
manufactured as much as you want, the chip will not
interfere.
the front left side of the cartridge, (as the cartridge
would be inserted into the machine). Other vendors
such as Toshiba and IBM, and Dell are also using
this engine. Make sure your replacement chip is
universal or brand specific if using in these
machines. On the Non-“Return” (return) cartridges
however, the chip is also present, but the killer part
is not active. These cartridges can be re-
manufactured as much as you want, the chip will not
interfere.
Lexmark T520/522
Lexmark Cartridge Part # 12A6730/12A6830
12A6735/12A6835
OEM Stated Yield: 6730/6830 7,500: 6735/6835
20,000
The “Return” cartridges have an ARD installed on
the right side of the cartridge, (as the cartridge would
be inserted into the machine). These chips are
physically located in a different spot from the older
Optra T cartridges. New replacement chips are
the right side of the cartridge, (as the cartridge would
be inserted into the machine). These chips are
physically located in a different spot from the older
Optra T cartridges. New replacement chips are
now
available. Other vendors such as Toshiba and IBM
are also using this engine. Make sure your
replacement chip is universal or brand specific if
using in these machines. On the Non-Prebate
cartridges however, the chip is also present, but the
killer part is not active.
are also using this engine. Make sure your
replacement chip is universal or brand specific if
using in these machines. On the Non-Prebate
cartridges however, the chip is also present, but the
killer part is not active.