Summit HL-630 OPC Benutzerhandbuch

Seite von 46
 
22
 
 
 
 
 
 
 
Lexmark W812 
(Fuji-Xerox XP-26) 
Lexmark Cartridge Part # 14K0050 
OEM Stated Yield: 12,000 
 
These cartridges use a chip, but it is not the “Killer 
type” These chips monitor the “Toner Low” as well 
as tell the machine the brand of cartridge it is. So far 
we have seen Lexmark, Epson, and IBM machines 
using these cartridges. The chips for each brand are 
different. Initial tests show that the chip can be re-
used for at least one cycle with no issues. Testing is 
still ongoing.  
 
 
 
 
Minolta PageWorks 8 
Xerox Drum Cartridge Part # 106R42 
OEM Stated Yield: 6,000 
Sharp FO-4400/4450/DC5500 Toner Cartridge Part # FO-
55ND 
 
There are many versions of PW8 drum cartridges, 
but only those used in the WorkCentre pro 555/575 
need to be reset. The reset procedure is as follows: 
 
Press the “MENU” button, and then the numbers 
“5”, “2”, “0”, and “4” 
Press “1” 
Press “ENTER”.  
Press “STOP” 
To replace the drum cartridge (click here) 
(We do not have this particular machine so I do not 
know exactly what that last line means. This 
information is straight from Xerox.) 
 
Sharp FO-55ND Toner Cartridge: These 
cartridges have a chip that must be replaced each 
cycle. New replacement chips are available 
 
 
 
 
Minolta PageWorks 1350 
Minolta Drum Cartridge Part # 1710568-001 
OEM Stated Yield: 20,000 
 
There are a few different reset procedures for the 
drum units, all dependant on the machine. All are 
done either by the Printer menu, or through the 
printer driver: 
 
Minolta PageWorks 1350W:  
 
Hold down the START/STOP and the 
INFORMATION buttons while turning on the 
printer. Hold them until the Ready (green) and Error 
(red) lights turn on. 
 
Epson EPL-6200:  
 
Hold down the START/STOP and the 
INFORMATION buttons while turning on the 
printer. Hold them until the Ready (green) and Error 
(red) lights turn on. 
 
Epson EPL-6200L Windows: 
 
Double click on the printers/faxes icon. Right click 
the icon for this printer. Click on the PRINTER 
SETTINGS button on the printer drivers 
OPTIONAL SETTINGS menu. Then click on the 
OPC LEVEL CLEAR or RESET OPC LEVEL 
button. Click on OK, the printer is reset. 
 
Epson EPL-6200L Macintosh: 
 
Access the REMOTE CONTROL PANEL utility, 
and then click SETTING. Click on the OPC LEVEL 
CLEAR, PHOTOCONDUCTOR LIFE RESET or 
RESET OPC LEVEL button. Click on OK, the 
printer is reset.