Summit HL-630 OPC Benutzerhandbuch

Seite von 46
 
27
 
 
 
 
 
 
 
Okidata OL-1200 OPC 
Okidata OPC Cartridge Part # 56118801 
OEM Stated Yield: 30,000 
(The procedure for these machines is the same as 
used for the Okidata OL-400e, and OP-20) 
 
Turn off the printer 
While holding the MENU1/MENU2 button down, 
turn the printer back on. Keep holding the button 
down until you see USER MNT on the display 
panel. Release the button. 
Press the MENU1/MENU2 button three times. The 
display will read DRUM CTR RESET. 
Press the ENTER button. The display will read 
WARMING UP, and finally ON LINE. The counter 
is reset! 
 
 
 
 
 
 
 
Okidata OP-4W 
Okidata OPC Cartridge Part #  56114101 
OEM Stated Yield: 10,000 
(OkiOffice 44/OkiPage 4W) 
(The procedure for these machines is the same as for 
the OkiFax 1000/1050/5300/5600, but with a 
different cartridge). 
 
Wait until the time, date and answering mode appear 
on the display. Then press the Select Function key. 
Press the 7/Counter Display One Touch Key. The 
display shows “Drum Count”. 
Press the Yes (left arrow) key to clear the counter 
Press the select Function key to finish. 
 
 
 
 
 
 
 
Okidata OP-8W 
Okidata OPC Cartridge Part #  40709901 (Type 
6) 
(Okidata OP-6W/8W/OkiOffice 84) 
OEM Stated Yield: 10,000 
 
(Again, the procedure for these machines is the same 
as for the OkiFax 1000/1050/5300/5600, and the 
OP-4W, but with a different cartridge). 
 
Wait until the time, date and answering mode appear 
on the display. Then press the Select Function key. 
Press the 7/Counter Display One Touch Key. The 
display shows “Drum Count”. 
Press the Yes (left arrow) key to clear the counter 
Press the select Function key to finish. 
 
 
 
 
 
 
Okidata OP-10e 
Okidata OPC Cartridge  # 40433305 (Type 5) 
OEM Stated Yield: 20,000 
 (The procedure for these machines is the same as 
used for the Okidata OP-6e, OL-600e, OP-14e) 
 
From the computer the printer is directly hooked up 
to, enter the Printer Status Monitor. Click on the 
“Printer Menu” tab. Click on the “Maintenance” tab. 
Click on the “Drum Counter Reset” tab.