Summit HL-630 OPC Benutzerhandbuch

 

3

 

The HL-3260 is Brothers first high speed printer. 
The drum cartridge comes with three RED sheets 
and two pieces of tape installed on the cartridge. 
There is a possibility that there is developer inside 
the drum cartridge. Removal of these is what seems 
to reset the counter, or there may not be a counter 
that has to be reset. These cartridges are still being 
investigated. 
 
 
 
 

 

Laser Printers: After replacing the drum unit, keep 
the front cover open (make sure the power is on). 
Press and hold the "GO" button until all four LED’s 
are lit. Once the four LED’s light up, close the front 
cover. Make sure the drum LED is off. The counter 
is reset! 
 
Fax Machines: Open the front cover. Press the 
CLEAR/BACK button. Press 1, when the display 
shows Accepted, close the front cover. The counter 
is reset! 

Laser Printers: make sure the machine is turned on 
and the Drum LED is blinking. Open the front cover. 
Press and hold the GO button for 4 seconds until all 
the LEDs light up. Once all the LEDs are lit, release 
the GO button.  Close the front cover. The counter is 
Reset! 

Fax Machines: Open the front cover. Press the 
CLEAR/BACK button. Press 1, when the display 
shows Accepted, close the front cover. The counter 
is reset! 
 
 

 

 

These cartridges have a gear-driven reset lever that 
must be reset. To Reset the cartridge, set the black 
reset gear as shown in the picture 
 
 
 
 
 
 

After replacing the drum unit, keep the front cover 
open (make sure the power is on). Press and hold the 
"GO" button for four seconds, the display will then 
show "DRUM CLEAR". Close the front cover. The 
counter is reset!