Star Micronics 4000 Benutzerhandbuch
58
7. Click on the Options button.
The Options button will take you to
the Options window where you can
select the Printing Status Options
described below.
the Options window where you can
select the Printing Status Options
described below.
As mentioned in Chapter 4, clicking
the box marked Display Status While
Printing will cause the printer to pop
up the print status window whenever
you print in the Windows Direct (GDI)
mode. However, you cannot select
this option if you have checked Use
WinType Print Manager.
the box marked Display Status While
Printing will cause the printer to pop
up the print status window whenever
you print in the Windows Direct (GDI)
mode. However, you cannot select
this option if you have checked Use
WinType Print Manager.
If you don't click this box, you only see
this box when the printer encounters an
error or during printer warm up
and needs to inform you of a warning.
this box when the printer encounters an
error or during printer warm up
and needs to inform you of a warning.
For example, when the printer has run out
of paper you will receive a message that
tells you to add paper.
of paper you will receive a message that
tells you to add paper.
If you put a check in the box marked
Beep When Print Job is Complete, you
will hear a beep whenever the printer has
finished a print job which you have sent.
Beep When Print Job is Complete, you
will hear a beep whenever the printer has
finished a print job which you have sent.
If you leave this box blank, the printer
will beep only when an error occurs.
will beep only when an error occurs.
8. Click OK to exit the Options window and
to save your changes.
9. Click OK to exit the Setup window.
10. Click on Close to exit the Printers
window and to save your printer selection.
11. Click on Settings in the Control Panel
menu and select Exit to exit the Control
Panel window.
Panel window.