Star Micronics 4000 Benutzerhandbuch

Warning: The fuser area, located in

the upper front part of the
printer, is extremely hot.
Be especially careful not to
touch any part of the fuser.

Warning: The drive motor becomes

very hot after extended
periods of printing.
Be careful not to touch any
metal part of the drive motor.

4. Wipe the laser output port window with a

dry, soft, lint-free cloth.
The window is located in front of the long
orange label in the center of the toner
cartridge compartment.

Do not use tissue paper to wipe the laser output port window as this
may leave paper fibers on the window.

5. Reinstall the toner cartridge.  (Follow the

Steps described on pages 2—4.)

This printer's feeding mechanism is designed to be jam-free.  However, you should ob-
serve the following steps should a paper jam occur and the 

 is lit.

Caution: Never pull paper out of the toner cartridge in the reverse direction of the

paper feed mechanism because this can damage the photosensitive drum.

1. Remove all printed material from the out-

put and paper trays and close them.

The fuser and drive motor are ex-
tremely hot.  Do not touch this area.

Orange label

Laser output port window