Star Micronics 4000 Benutzerhandbuch
74
Other mechanical problems
This is to provide you with a list of other possible problems and their easy remedy.
The front door will not shut
Remove and reinstall the toner cartridge. Refer to "Installing the toner cartridge" on
pages 2 — 4.
Remove and reinstall the toner cartridge. Refer to "Installing the toner cartridge" on
pages 2 — 4.
The
Error LED
indicator is lit and the printer will not print
•
Make sure that the front door is properly shut.
•
Remove and reinstall the toner cartridge. Refer to "Installing the toner cartridge"
on pages 2 — 4.
on pages 2 — 4.
•
Check for a paper jam. Refer to "Clearing paper jams" on pages 67 — 68.
•
If the
Error LED
indicator remains lit, move the paper release lever to the release
position (toward the front of the printer), remove all print media from the feeder
tray and then turn the power OFF and ON again. If, after performing all of these
procedures, the
tray and then turn the power OFF and ON again. If, after performing all of these
procedures, the
Error LED
indicator still remains lit, contact an authorized Star
Micronics service center.