Ultra electronic Sprinter Benutzerhandbuch
3461/07/01 ISSUE 2
PRINTHEAD INSTALLATION & COMMISSIONING SPEC.
DCR No. 26106
I
MAGICARD PRINTER
INSTRUCTIONS FOR REPLACEMENT OF
PRINTHEAD AND PRINTHEAD ASSEMBLIES
WARNING - The Magicard colour printer contains hazardous voltages.
CAUTION - The following procedures involve contact with Electrostatic Sensitive
Devices. All Precautions for handling Electrostatic Sensitive Devices should be
followed at all times, including the use of a grounded wrist strap.
Devices. All Precautions for handling Electrostatic Sensitive Devices should be
followed at all times, including the use of a grounded wrist strap.
HOW TO USE THESE
INSTRUCTIONS
The following procedures are intended to be used for replacement of Magicard
Thermal Printheads and Magicard Thermal Printhead Assemblies.
Thermal Printheads and Magicard Thermal Printhead Assemblies.
If replacing a Thermal Printhead Assembly do NOT carry out those parts of this
document written in italics . These procedures, for head angle adjustment, require some
previous Magicard product training or experience, and must not be undertaken by end
users. Therefore end users are supplied with replacement Printhead Assemblies, which
have already been adjusted for correct head angle.
document written in italics . These procedures, for head angle adjustment, require some
previous Magicard product training or experience, and must not be undertaken by end
users. Therefore end users are supplied with replacement Printhead Assemblies, which
have already been adjusted for correct head angle.