Tally Genicom 6600 Benutzerhandbuch
124
Chapter
7
Control Sequences
Valid Control Sequences
The following eleven control sequences are valid in Barcode/Block Character
Mode:
Mode:
^A
Move the Home.
^B
Select Horizontal Barcode.
^C
Select Vertical Barcode.
^D
Select Double Density Block Characters.
^M
Select Normal Density Block Characters.
^N
Select New Introducer.
^R
Relative Cursor Move.
^S
Signed Cursor Move.
^T
Absolute Cursor Move.
^U
Set Unit Line.
^W
Set Barcode Density.
^A - Move The Home
Moves the Home pointer and homes the cursor.
Command ^A(home)NL
Arguments
(home)
The distance to move the Home pointer down in
increments of 0.01 inches. Default is the current
vertical position.
increments of 0.01 inches. Default is the current
vertical position.
^B - Select Horizontal Barcode
Selects horizontal barcode and sets barcode parameters.
Command ^B(type);(height);(size);(option)NL
Arguments
^B
Selects Horizontal Barcode Command.
(type)
The style of Barcode (default = 1).
1 = Code 39
2 = Code 39 with Check Digit added.
3-5 = Not used.
6 = Two of five with 2:1 Ratio.
7 = Interleaved Two of Five with 2:1 Ratio.
8-9 = Not used.
10 = Two of Five with 3:1 Ratio.
11 = Interleaved Two of Five with 3:1 Ratio.
12 = UPC Version A, 10 Data Digits
13 = EAN-13
14 = EAN-8
(height)
Height of the individual bars in increments of 0.01
inches, ranging from 1 - 255 (default = 80).
inches, ranging from 1 - 255 (default = 80).