Tally Genicom 6600 Benutzerhandbuch
Smooth Parameter
149
PGL Graphic Parameters
This section explains the Graphic Category parameters that applies to the
PGL Graphic Option on your printer.
PGL Graphic Option on your printer.
Smooth Parameter
The Smooth Parameter affects the block characters in PGL. Smoothing
causes the stair step appearance of larger block characters to be less
pronounced. This parameter dictates the character size at which smoothing
takes place. The default setting for Smooth is 3.
causes the stair step appearance of larger block characters to be less
pronounced. This parameter dictates the character size at which smoothing
takes place. The default setting for Smooth is 3.
Example:
Darkbar Parameter
For barcodes to print at a heavier than normal dot density, use this parameter
and set up the printer to output all barcodes at 120 DPI instead of 60 DPI.
and set up the printer to output all barcodes at 120 DPI instead of 60 DPI.
See “Half-Dot Mode (Double Density)” on page 36 for a sample of dark
printing. The default for this parameter is OFF.
printing. The default for this parameter is OFF.