Tally Genicom 8026DN Benutzerhandbuch

Jun 06

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

 WARNING

• The Power specifications are listed below. The specifications that apply to your machine 

depend on your machine configuration. Connect the power plug only to a properly rated 
power outlet. Otherwise, it can cause fire or electric shocks.
– Rated voltage 100–120 V

Rated frequency 50/60 Hz

– Rated voltage 220–240 V

Rated frequency 50/60 Hz

• Never use multi-plug adaptors to plug multiple power plugs in the same outlet. Be sure to 

operate the machine on a sole-use receptacle. Multiple connectors can cause the outlet to 
overheat and cause fire.

• To prevent fire or electric shocks, follow the instruction below based on your machine 

configuration. 
If your machine is a 220 – 240 V model, there is no need to attach a separate earth line since 
the earth connection is incorporated in the power line. Plug it into a properly rated outlet.
If your printer is a 100–120 V model, use the earth bundled with the power cord, located at 
the rear of the printer. The earth wire must be connected to one of the following conductors:
– Earth terminal of the specified power outlet
– A piece of copper buried in the earth 650 mm (25.6") or deeper
– Earth terminal with Class D* earthing.

*Class D is the regulation for Japan only.

1. Connect the power cable into the printer, and plug it into the electrical wall outlet.