Tally Genicom 8026DN Benutzerhandbuch
Jun 06
3-2
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Power Problems
Dealing With Problems
When your printer suffers from a problem, refer to one of the four categories below to determine
the cause of your problem, and the action needed to rectify it.
the cause of your problem, and the action needed to rectify it.
• Power problems
• Print quality problems
• Paper transport problems
• Other problems
If your problem is not included in these categories or if you cannot rectify the problem using the
prescribed procedures, turn off the printer, disconnect the power cord from the AC outlet, and
contact your dealer or a Customer Service Center for assistance.
prescribed procedures, turn off the printer, disconnect the power cord from the AC outlet, and
contact your dealer or a Customer Service Center for assistance.
WARNING
• Do not make any changes or modifications to the equipment, as this may result in fire.
CAUTION
• Turn off the printer and disconnect the power cord from the AC outlet before performing
maintenance on the printer. Failure to turn off the printer and disconnect the power cord may
result in electric shock.
result in electric shock.
Power Problems
Description
Cause
Action
No power
The < I > mark of the power switch
is not depressed.
is not depressed.
Check that the power switch is in
the < I > position.
the < I > position.
The power cord is not properly
connected to the AC outlet.
connected to the AC outlet.
Turn off the unit, confirm that the
power cord is properly connected to
the AC outlet, and turn the unit back
on.
power cord is properly connected to
the AC outlet, and turn the unit back
on.
The AC power supply’s voltage is
not suitable for use with the unit.
not suitable for use with the unit.
Confirm that the printer is
connected to a suitable power
supply.
connected to a suitable power
supply.
The unit turns off
frequently
frequently
The printer is defective.
Turn off the unit, disconnect the
power cord from the AC outlet, and
contact your dealer or a Customer
Service Center for assistance.
power cord from the AC outlet, and
contact your dealer or a Customer
Service Center for assistance.
The power cord is not properly
connected to the AC outlet.
connected to the AC outlet.
Turn off the unit, confirm that the
power cord is properly connected to
the AC outlet, and turn the unit back
on.
power cord is properly connected to
the AC outlet, and turn the unit back
on.