Tally Genicom 8026DN Benutzerhandbuch

Seite von 248
Jun 06
3-14
TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide
Warning Messages and Error Messages
Error Messages 
The table below lists error messages, the possible causes of each error, and the actions 
required to recover from each error.  
Error Message
Possible Cause
Action
Load Paper Tray [x]
[type] [size] 
There is no paper or wrong paper in 
tray [x]
Add correct paper type to 
corresponding tray
Tray [x] Missing
Insert Tray
Tray [x] is out of printer
Insert the corresponding tray into 
printer
Front Cover Open
Close Cover
The front cover is open
Close the front cover
Feed Jam
Check Tray [x] 
A paper jam has occurred in tray [x]
Remove jammed paper from 
corresponding tray
Registration Jam
Open Cover A
A paper jam has occurred inside of 
printer
Open cover A and remover the 
jammed paper
Registration Jam
Open Cover B
A paper jam has occurred inside of 
printer
Open cover B and remove the 
jammed paper
Fuser Jam
Open Cover B
A paper jam has occurred inside the 
printer
Open cover B and remove the 
jammed paper
Duplex Jam
Open Cover B
A paper jam has occurred inside the 
printer
Open cover B and remove the 
jammed paper
Fuser Missing
Install Fuser
The fuser is missing from the printer
Re-install the fuser
BTR Missing
Install BTR
The BTR is missing from the printer
Re-install the BTR
PHD Missing
Install PHD
The process unit is missing from the  Re-install the PHD (process) unit
Toner [x] Missing
Install Toner [x]
Toner cartridge [x] is missing
Re-install the corresponding toner 
cartridge
Fuser Life Over
Replace Fuser
The fuser unit needs to be replaced
Replace the fuser unit
BTR Life Over
Replace BTR
The BTR unit needs to be replaced
Replace the BTR unit
PHD Life Over
Replace PHD
The process unit needs to be 
replaced
Replace the PHD (process) unit.
Toner [x] Empty
Replace Toner
Toner cartridge [x]is empty
Replace toner cartridge [x]
Fuser Type Err
Install / Reset
Wrong fuser unit installed
Re-install or replace with correct 
fuser
Fuser Type Err
Install / Reset
Wrong fuser unit installed
Re-install or replace the fuser unit