Canon CP800 Benutzerhandbuch

Press the q button to turn on SELPHY. 

When the installation finishes, click [Restart] to restart the 

computer and complete the installation.





Use the USB cable to connect SELPHY to the computer.

Refer to the user guide included with the cable or 

computer for handling instructions.




If the screen in Step 5 does not appear, open it from the [Start] menu r [All Programs] r

[Canon Utilities] r [SELPHY Photo Print] r [SELPHY Photo Print].

If the screen in Step 5 does not appear, follow the procedure below to register your printer. 

After clicking [   ] in the menu, click [System Preferences], then [Print & Fax] to open the [Print

& Fax] window. Click [+] to select [CP800] from the pop-up window, then click [Add].

After you have finished registering your printer, click [SELPHY Photo Print] from the Dock (the 

bar at the bottom of the desktop), and the screen in Step 5 will appear. 





Commercially available USB cable

SELPHY may not operate correctly if it is connected to a computer via a USB hub.
SELPHY may not function properly if other USB devices (with the exception of a USB mouse or USB 
keyboard) are used at the same time. Disconnect any other USB devices from your computer and then 
reconnect SELPHY.
Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to the 
computer’s USB port. If you accidentally do so, awaken the computer from standby mode without 
disconnecting the USB cable.
For details on how to awaken the computer, refer to the user guide included with your computer.








The software will start and the screen on the left will 

appear when a connection between SELPHY and the 

computer is established.

Perform Steps 2 to 4 to automatically start the software 

the next time you want to use it.





COP

Y