Citizen Systems CT-S4000DC Benutzerhandbuch
— 21 —
4.7 When the Paper Cover Cannot Be Opened
If the cutter blade remains protruded due to paper jam or for any abnormality, opening
the paper cover may be disabled. In this case, do not open the paper cover forcibly.
Insert a Phillips screwdriver (size #1) into the cutter lock releasing feed hole and turn it in
the direction of arrow (clockwise).
the paper cover may be disabled. In this case, do not open the paper cover forcibly.
Insert a Phillips screwdriver (size #1) into the cutter lock releasing feed hole and turn it in
the direction of arrow (clockwise).
When you find that both ends of the
blade reached the lowest position,
stop turning the screwdriver. Open
the cover and follow the procedure
of removing jam or other cause of
trouble.
blade reached the lowest position,
stop turning the screwdriver. Open
the cover and follow the procedure
of removing jam or other cause of
trouble.
Cutter lock
releasing feed hole
releasing feed hole
Phillips screwdriver
Lighting and blinking status of each error including the above is shown below.
Status
POWER LED
ERROR LED
Buzzer
Paper-end
Lights
Lights
Paper near-end
Lights
Lights
Printer cover open
Lights
Lights
Printer cover open
Lights
error *1
Cutter lock error
Lights
Head overheat error
Lights
Paper jam error
Lights
Memory check error
Lights
Low voltage error
Lights
High voltage error or
Lights
Power switch operation error
Macro execution
Lights
wait *2
Black Mark detection
OFF
error
Waiting for paper
OFF
(label) cutting*L, *M
Paper (label)
OFF
detection error*L, *M
*1: When the printer is printing.
*2: The ERROR LED may blink even in the execution of macro function.
*2: The ERROR LED may blink even in the execution of macro function.